KFI Products 101145 2 Inch Black Front Receiver Hitch for ATV/UTV - Perfect for Towing Trailers & Mounting Accessories

It was a little more work to install than I first thought, but the instructions are accurate. You have to take off the bumper, put the plate on the frame, then reattach the bumper using the new hardware. You need a 14mm socket and end wrench for a backing wrench (or 9/16" is the same size), a 1/2" socket and end wrench, a 10mm socket and end wrench (to remove factory bolts on top), and about 15 minutes. The bottom bolts on the skid plate / bumper are 14mm (9/16"). You have to completely remove the four bolts on top (12mm wrenches) and two on bottom (14mm socket. Nut is welded and no backing wrench is needed. There are six new bolts, the four with 14mm heads are for the back holes and go through the hitch bracket, bumper bracket, and bumper tube. The two with 1/2" heads go through the front holes and small U-shaped brackets that go around the bumper tube. As long as you put the right bolts in the right locations, you're golden.