PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring, Crack Repair & Concrete Bonding - 8.6 oz Gray Cartridge (4-Pack) - Ideal for Driveway Repairs, Foundation Fixes & Structural Concrete Projects

PC Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134 degree F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75 degree F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray. Work time (70 degree F): 20 minutes. Cure for service: 4 Hours. Elongation: 1.9 percent. Conduction (electric): Non conductive. Thermal shock: Excellent. Toxicity: Non toxic once cured. Heat range: -20 to 115 degree F. Compressive strength: 10990 psi yield. Compressive modulus: 214,180 psi. Tensile strength: 6790 psi. Heat deflection: 134 degree F 7 day. Bond strength: 1100 psi (2 day), 1640 psi (7 day). Consistency: Non-sag paste. Water Absorption: 0.40 percent. Shrinkage: 0.003.